Test Video
Sailfish 242 CC:
Versatile Angler w/Dayboat Comforts
Upscale two-tone upholstery distinguishes the Sailfish 242 CC from center consoles designed only as fishing platforms; she welcomes the family aboard. Note the swing-away backrests, creating chaise lounge seating at the bow. Sailfish uses carbon-fiber- and Kevlar®-reinforced hull and deck components, and she includes a full complement of hard-core fishing features.
More...
|

Accommodations Video
Monte Carlo Yachts 105:
Advanced Engineering plus Classic Luxury
The luxurious salon of the Monte Carlo Yachts 105 makes the most of her substantial 23'5" (7.14 m) beam, while the aft bar provides easy access for guests both from the salon and the cockpit.
More...
|

Test Video
Mercury Active Trim:
Set-and-Forget Hull Trim
Mercury's Active Trim system provides five preset trim curves, giving boaters set-and-forget control for best performance and fuel economy. The operator can quickly select the best preset based on wave direction and boat loading, and from there the system takes over. It's controlled via the Active Trim pad or the VesselView screen. It can be retrofitted on Merc outboards from 40 to a combined 1,750 horsepower, and back to the 2003 model year.
More...
|

Test Video
TAHOE® 2150:
Nimble Handling & Multisport Fun
The TAHOE® 2150 is a deckboat for folks who like to do more than just sit around, and she can be equipped to be a capable platform for fishing or tow sports. But she can do lounging and entertaining as well, with wraparound seating both fore and aft for friends and family.
See all the details here.
|

Factory Video
Jeanneau Material Testing:
In-House Lab Confirms Build Quality
All Jeanneau and Prestige yachts benefit from the continuous, intensive testing of the materials used in hull layup at the company's in-house lab. The process includes chemical, thermal, mechanical and hydro-static testing to make sure each component remains strong and waterproof throughout its life. Resins are also tested to ensure they mate perfectly with the vacuum-infusion process, which is used in most hulls and parts made for the company's lines.
More...
|


|
BoatTEST.com, LLC
51 Bank Street, Suite 2A
Stamford, CT 06901
203-323-9900 [email protected]
|
|
All articles, Captain's Reports, video content or other
material which appear on BoatTEST.com and in its newsletters are accurate and factual
to the best knowledge of BoatTEST.com and its staff. All findings, beliefs, experiences,
or endorsements presented are the honest opinions of BoatTEST.com or its contributors.
In compliance with FTC 16 CFR Part 255 BoatTEST.com advises its readers that content
that appears in its newsletter or on its website may have been produced for compensation
or the prospect of future compensation. BoatTEST.com makes no claims for the veracity
or motivation of reader comments, Owners’ Reports, and other contributions which
are all clearly labeled as such.
|
|